From a single failed component on a system that is otherwise running well, through to pulling out old equipment and starting from scratch, we handle the full range of heating and cooling work for homes and properties across Midvale. A furnace that trips out on a cold morning, a heat pump that has stopped responding, an AC that runs but never cools the space down, a full system that has reached the end of its useful life: these are the calls we take, and we cover all of them.
Midvale is a city with a real mix of housing stock, and the work reflects that. Older properties with equipment that has been running for years sit alongside newer builds and multi-unit properties where a landlord or property manager needs a fault resolved quickly across an occupied unit. We work with all of them.
Call (385) 263-3965 for a quote. We are open every day from 5:30 AM to 10:00 PM.
When you call, the first thing we do is go through the details with you. What the system is doing, or not doing. What type of equipment you have and roughly how old it is. Whether the problem showed up suddenly or has been building for a while.
That conversation lets us scope the visit before anyone is booked. You get a price for the call itself and an honest sense of what the work is likely to involve. Nothing is scheduled until you know what it covers. If you have the brand and model of the equipment on hand when you call, that helps, but it is not required. Describe the symptom and we will take it from there.
We will go through what the service covers before it is booked.
A home that has never had central air, or one where the existing system has been condemned rather than repaired, is a different kind of job from a straightforward repair call. Central air installation means sizing the equipment to the actual load the house presents, running or connecting the ductwork, and confirming the thermostat is communicating before sign-off. Getting the sizing right matters more than most people expect. An oversized unit short-cycles and leaves the space humid and uncomfortable. An undersized one runs constantly without ever satisfying the set temperature.
A burning smell on first startup is sometimes nothing more than dust burning off a heat exchanger that has sat idle. But if it persists, or if it smells electrical rather than dusty, that is a fault worth investigating before the system runs another cycle. A musty smell points somewhere different, usually toward the evaporator coil or the drain pan, where moisture has been sitting long enough to grow something. Evaporator coil cleaning addresses the source rather than masking the symptom, and it is part of how we approach that call.
A boiler heats the living space through water circulated to radiators or radiant floor loops, and the faults it develops are different from what a forced-air furnace shows. Pressure problems, zone valves that stick open or closed, circulator pump failures, and air trapped in the lines are all common. When a room on a hydronic system is not heating, the problem is often in the distribution rather than the boiler itself. We handle boiler repair and service, and we work through the distribution side when the symptom points that way.
A space that sits outside the main duct system, whether that is a finished basement, a room addition, or a detached structure, is a good candidate for a ductless mini-split. The indoor head mounts on the wall, the outdoor unit handles the refrigerant circuit, and the two connect through a small penetration in the wall. No ductwork required. Zoning and comfort-control systems built around mini-splits let different spaces run at different temperatures independently, which matters when one part of a property has very different heating or cooling needs from the rest.
A system that runs for hours without reaching the set temperature is not necessarily a failed system. Low refrigerant charge, a dirty condenser, a blocked evaporator coil, duct leaks losing conditioned air before it reaches the rooms, or a thermostat reading incorrectly are all possibilities. Ductwork repair and sealing is worth considering when the equipment checks out but the house still won't reach temperature. The fault is in the delivery, not the source. We work through the likely causes in order rather than replacing parts at random.
HVAC work does not have a single price because no two jobs are identical. A diagnostic visit on a furnace that won't start is priced differently from a full system replacement. A duct sealing job on a house with accessible runs is a different scope from one where the ductwork is buried in finished walls. What moves a quote is what the fault turns out to be, what has to be reached to fix it, and whether a repair or a replacement is the better answer once someone has actually looked at the equipment.
What the thermostat is telling you is a good place to start, but the full picture comes from the equipment itself. We ask the right questions on the call, confirm the price before the visit is scheduled, and go through the findings with you before any work begins. HVAC work sized and installed the way the manual calls for is the standard we hold every job to, and that applies whether the visit is a tune-up or a full system swap.
Code-compliant work. Clear diagnosis. Pricing set out up front.
For planned work, such as a seasonal tune-up, a thermostat upgrade, or a system replacement that has been on the calendar, booking a few days ahead gives the best chance of a time that suits your schedule. We confirm the scope and the price on the call so the visit is ready to go before anyone shows up.
For short-notice calls, we take them when the schedule allows. Call and we will tell you what is available. We are open every day from 5:30 AM to 10:00 PM, including weekends.
When a system is completely down, that call moves to the front of the conversation. A home with no heat during a hard freeze, or a rental unit with no cooling in peak summer, is not a situation to schedule around. Describe what is happening when you call and we will confirm what we can do.
For landlords and property managers handling an occupied unit, we work around the tenant's presence. Let us know the access situation on the call and we will work through it. We'll take the details and get it scheduled.
Midvale has properties where the HVAC equipment has been in place for a long time, and working on older systems brings its own set of complications. Parts for discontinued equipment can be hard to source, and a repair that is straightforward on a current-model furnace may take longer when the unit is no longer in production.
Ductwork is another issue in older properties. A duct system that was sized for the original floor plan may never have been extended properly when a room was added or a basement was finished. Indoor air quality and air filtration can also suffer in older homes where the system has not been updated, because the equipment handling the air may not have been designed with filtration in mind. When we assess an older system, we look at what it would take to bring it up to where it needs to be, and we give you an honest read on whether that makes more sense than replacement.
Readings shared at the end of a maintenance visit give you a clear picture of where an older system actually stands.
We cover Midvale and the surrounding communities across Salt Lake County, including Murray, White City, Sandy, Cottonwood Heights, and Taylorsville. If you are in any of these areas and need a repair, a replacement, or a seasonal maintenance visit, call us and we will confirm coverage for your address.
The type of work does not change by location. Furnace repair, heat pump installation, AC service, ductwork, thermostats, boiler service, and emergency no-heat calls are all on the table regardless of which community you are calling from. We'll get the fault identified and the work priced. If you are working out what the job needs, our page listing every HVAC service goes through it.
Older homes in the area often have duct systems that were sized for a different floor plan, equipment that has been running well past its original design life, and filtration setups that were never updated. A visit on an older property takes those factors into account, and we go through the full picture with you before recommending repair or replacement. If the ductwork or controls need attention alongside the primary equipment, we will say so on the call.
Clear the area around the outdoor unit so the technician can reach all sides of it. Trim back any vegetation that has grown close to the unit, and make sure the path from the gate or access point to the equipment is clear. If the unit is in a fenced area, make sure the gate is unlocked before the visit.
When you call, let us know the access situation and whether the tenant will be present. We work around occupied units regularly and can coordinate the visit details with you before anything is booked. The scope and price are confirmed with you, not with the tenant, before the work begins.
Ask what the previous visit covered, what was found, and why the fault came back. A recurring fault often points to a misdiagnosis or an incomplete repair rather than a new problem. When we take a callback on a system that has already been worked on, we treat it as a fresh diagnostic and go through the full picture rather than assuming the previous assessment was correct.
Call (385) 263-3965 and we will go through the details on the phone, confirm the price, and get the work on the schedule.
We are open every day from 5:30 AM to 10:00 PM. We take calls across Midvale and Salt Lake County. Furnace fixed. AC humming. Home comfortable again.
The right answer on whether a system is worth keeping only comes after someone has actually looked at it. That is what the visit is for.
Heating and cooling work in the surrounding towns: Murray, Cottonwood Heights, Taylorsville.
Heating and cooling work covers a wide range of jobs, and the right service depends on what the system is doing, how old it is, and what the symptoms point to. We handle everything from a quick diagnostic and repair to a full system replacement, and we work with homeowners, landlords, and commercial clients across Midvale and Salt Lake County. The table below lays out what each service covers and who it fits best. Call us to go through the details and get a price before anything is scheduled.
| Service | What It Covers | Best For | Helpful Details |
|---|---|---|---|
| Full System Installation & Replacement | Load calculation and sizing, Equipment selection, Full installation, System commissioning and sign-off | Homeowners replacing an aging system or upgrading from an undersized or mismatched setup | HVAC work sized and installed the way the manual calls for matters at Midvale's elevation, where an oversized or undersized system shows its faults fast. |
| Furnace Repair & Replacement | Full furnace diagnostic, Repair or replacement recommendation, New furnace installation, Ductwork checked when symptoms point that way | Midvale homeowners dealing with a furnace that is failing, aging out, or no longer keeping up with winter demand | A furnace more than 15 years old facing a significant repair is often a better candidate for replacement. We walk through both options so the decision is yours to make with the full picture. |
| Indoor Air Quality & Air Filtration | Filtration system installation, Air purifier setup, Filter sizing and compatibility, System integration check | Households concerned about particulates, dry air, or air quality in Utah's high-desert climate | A filtration setup sized to the air handler makes a measurable difference in what the system circulates through the home, especially during high-particulate periods. |
Every heating and cooling situation is different, and the right answer depends on the equipment, the symptoms, and what the diagnostic turns up. Call us at (385) 263-3965 to go through the details and get a price before anything is scheduled.
(385) 263-3965